The open thumb design allows for enhanced ease of fit and patient comfort while the lycra top cover allows for faster heating and cooling to speed the application process.
Exos Upper Extremity - Patients
Exos Upper Extremity Fracture Braces allow patients the ability to continue day-to-day activities
Exos wrist, thumb and arm braces provide fracture bracing and splint support to patients with injuries requiring stabilization by molding it directly to the anatomy for a customizable fit. The comfortable EXOS bracing system allows you to return to your normal lifestyle faster with greater convenience.
There is no cast saw required to remove the brace and the waterproof properties allow for easy skin and brace hygiene, as well as involvement in water activities. Ask your clinician about EXOS Upper Extremity Braces, the world’s first fully customizable, adjustable, reformable and waterproof bracing system.
The smallest of patients can benefit from Exos® technology. The ability to heat form and custom fit helps to ensure proper uniform support and comfortable fit. Exos braces are radiolucent and do not need to be removed for x-ray imaging. Provides support and protection for major injuries to the wrist.
Provides support and protection for injuries to the wrist and forearm. Used primarily for non-displaced fractures to the distal radius or distal ulna, and can be employed for acute injuries as well as for post-operative support. Not made with natural rubber latex.
Used to stabilize fractures to the 4th and/or 5th metacarpal (MC) bones, and also provides stabilization to the 4th and 5th interphalangeal and wrist joints. May be used for metacarpal (MC) head/neck fracture of the 4th and/or 5th metacarpal. Not made with natural rubber latex.
Intended for carpal bone injuries such as lunate, pisiform, or triquietral fractures, scapho-lunate dislocations, triangular fibro-cartilage complex (TFCC) tears, radio-carpal ligament injuries, or minimally displaced or stable distal radius or distal styloid fractures.
Intended for carpal bone injuries such as lunate, pisiform, or triquietral fractures, scapho-lunate dislocations, triangular fibro-cartilage complex (TFCC) tears, radio-carpal ligament injuries, or minimally displaced or stable distal radius or distal styloid fractures. May be used to support stable wrist fractures.
The Long Thumb Spica II with Boa® (LTS II) provides stabilization to the thumb in adduction, metacarpalphalangeal (MCP) joint, carpometacarpal (CMC) joints, distal radius, distal ulna and conditions where immobilization of the wrist in the sagittal and frontal plane is required. The LTS II may be used preoperative, postoperative, post-traumatic as well as Carpal Tunnel Syndrome
Provides primary stabilization for the first metacarpalphalangeal (MCP) joint and first carpometacarpal (CMC) joints, as well as secondary support for the radiocarpal and radioulnar wrist joints. Provides stability for injuries to the base of the thumb at the CMC joint, such as Bennett’s or Rolando’s fractures, or to stabilize a painful CMC joint.
Provides primary stabilization for the first metacarpophalangeal (MCP) joint and first carpometacarpal (CMC) joints, as well as secondary support for the radiocarpal and radioulnar wrist joints. Provides stability for injuries to the base of the thumb at the CMC joint, such as Bennett’s or Rolando’s fractures, or to stabilize a painful CMC joint.
Designed to provide stabilization to the thumb, first metacarpophalangeal (MCP) joint, the first carpometacarpal (CMC) joint, wrist joint, distal radius and distal ulna. Useful for all injuries to the thumb, such as Bennett’s or complex Rolando’s fractures, suspected or confirmed navicular (scaphoid) fractures, and for other carpal bone injuries.
Used to stabilize fractures to the 2nd and/or 3rd metacarpal (MC) bones and the respective metacarpal-phalangeal (MCP) joints of the hand. This pre-fabricated, custom-molded orthoses is designed to provide fit and support. The radial gutter portion of the RGFB allows the caregiver to achieve greater than 70° of flexion at the MCP joints of the 2nd and 3rd digits.
The STS II provides stabilization to the first metacarpohalangeal (MCP) joint and may be used preoperative, postoperative, post-traumatic as well as for degenerative conditions. Not made with natural rubber latex.
Immobilizes the base of the thumb to stabilize injuries to the ulnar collateral ligament (UCL) commonly known as Gamekeeper’s thumb, fractures or avulsion injuries to the proximal first phalanx or distal first metacarpal, severe sprains of the thumb, or for arthritic conditions involving the metacarpohalangeal (MCP) joint. Not made with natural rubber latex.
Immobilizes the base of the thumb and the interphalangeal joint, to stabilize injuries to the ulnar collateral ligament (UCL), fractures or avulsion injuries to the proximal first phalanx or distal first metacarpal, severe sprains of the thumb, or for arthritic conditions involving the metacarpophalangeal (MCP) joint, or the interphalangeal (I-P joint).
The Hand Based Ulnar Gutter Brace is used to stabilize fractures to the 4th and/or 5th metacarpals or phalanges. This molded orthosis is designed to provide fit and support. The ulnar gutter portion of the Hand Based Ulnar Gutter Brace allows the caregiver to achieve greater than 70° of flexion at the MCP joints of the 4th and 5th digits. Not made with natural rubber latex.
The Hand Based Radial Gutter Brace is used to stabilize fractures to the 2nd and/or 3rd metacarpals or phalanges. This molded orthosis is designed to provide fit and support. The radial gutter portion of the Hand Based Radial Gutter Brace allows the caregiver to achieve greater than 70° of flexion at the MCP joints of the 2nd and 3rd digits. Not made with natural rubber latex.
Used to stabilize fractures to the mid-shaft of the humerus. The HFB may be appropriate for some injuries to the more proximal humerus. Not made with natural rubber latex.
Suggested HCPC: L3980
The soft, microfiber material in the Exos Undersleeve enhances the comfort and protects the patient's skin from shear and moisture. Designed with a slight compression and a flat seam to eliminate skin irritation, the wrist undersleeve easily fits under the Exos wrist and short arm fracture braces.
Suggested HCPC: L3995
Multiple layered thermoformable material in a single construct ideal for custom fabrication for musculoskeletal stabilization. Not made with natural rubber latex.
The Boa Locking Ring is intended to prevent unprescribed loosening of the Boa reel or removal of Exos braces.
Convenient sized oven intended to be used to heat the Exos upper and lower extremity products.
The oven head includes the power controls and heating element. This accessory is compatible to use with any existing DJO oven dome and base.
The 3” extension ring is intended to be used to heat larger brace or brace components, so the heating element does not come in contact with any portion of the product while being heated.
The Thermal Oven Extension Ring Kit is intended to be used for heating larger braces or brace components, so the heating element does not come in direct contact with any portion of the product while being heated. This kit includes one 3” extender ring and one thermal wrap as shown below. Sold as a separate accessory.
DJO, LLC
1430 Decision Street
Vista, CA 92081
+760.727.1280
© 2018 DJO Global All Rights Reserved
